Replacing the Battery in your 2008 Honda CRV Key Fob
Are you having trouble remotely unlocking or locking your 2008 Honda CRV? One possible issue could be that the battery in your key fob is dead. Don’t worry, replacing it is a quick and easy fix that you can do at home.
The first step is to purchase a replacement battery. The 2008 Honda CRV key fob uses a CR1616 battery, which can be found at most electronics or hardware stores. Once you have the replacement battery, locate the small notch on the edge of the key fob. Use a small flat object, like a screwdriver or coin, to push down on the notch and separate the two halves of the key fob.
- Step 1: Purchase a replacement CR1616 battery
- Step 2: Use a small flat object to separate the two halves of the key fob
- Step 3: Replace the dead battery with the new one
- Step 4: Reassemble the key fob
| Key Fob Battery Replacement |
|---|
| 1. Purchase a replacement CR1616 battery |
| 2. Use a small flat object to separate the two halves of the key fob |
| 3. Replace the dead battery with the new one |
| 4. Reassemble the key fob |
Once you have separated the two halves, locate the battery compartment. Use your flat object to gently pry the old battery out of the compartment. Be sure to note the orientation of the battery before removing it. Take the replacement battery and snap it into place in the same orientation as the old battery.
After the new battery is in place, you can reassemble the key fob by lining up the two halves and pushing them together. You should hear a click when the two halves are securely connected. Now you can test your key fob to make sure it works properly.
Replacing the battery in your 2008 Honda CRV key fob is a simple task that can save you time and money. Now you can enjoy the convenience of unlocking and locking your car without any issues!
