The Honda Pilot 2016 Key Fob Battery is one of the gold-standard SUV’s. Large. Comfy. SUV-like. The Pilot has used nearly every key fob Honda has offered since it launched in 2004. The most current smart Honda Pilot Key Fob Battery looks something like this:
Honda Pilot 2016 Key Fob Battery
This is a very quick battery to replace. It will take you just a few minutes. If you want to see all of the model’s replacement, click here. This is the fob used in model years:
Honda Pilot Key Fob Battery Replacement Guide (2005 – 2020)
In this article, we are going to show you how to change the key battery in a Honda Pilot Key Battery. It’s a smart key, and this was used from 2016 till present. So this is really easy battery change. If you look at the back here, it’s a little knob you can press to release the internal valet key.
You can go ahead and just take that valet key and right in the middle. If you put it right in between these two pieces of Fob, we’re just going to use that to get some leverage kind of twisted a little bit towards you, twist it away from you, and you can just pop this thing right off. This Fob is really nicely designed and that you’re not going to break anything when you pop it off. It’s got some good points just to get that leverage with the valet key and pop it off. Now, the internal battery that you need for the pilot is the CR 2032 3 volt coin battery.
To get that out, you can just on the left side here, take your valet key, pop that out. When you’ve got a new CR 2032 battery, you’ll notice there’s some kind of longer prongs on this right side here. If you place the battery in underneath those first, then you can just push it down in. And it makes your life a lot easier than trying to push down through. So make sure to insert the battery that way.
Then take your handy-dandy other side of the Fob, snap that back together, and just one last thing. Put the key back in, of course, and that’s it. That’s how you change the key battery on Honda Pilot smart key Fob from 2016 to present.
Replace a Honda Pilot Key Fob Battery (2005 – 2015) – Physical Key Rounded Buttons
In this part, we’re going to show you how to change the key Fob battery for a Honda Pilot, and this one with the circular, rounded keys here is used from 2005 to 2015. This is for the Honda Pilot key that looks like this. The first thing we want to do is flip this over and you’ll see at the base there’s a small screw.
If we put in our smallest screwdriver right into that notch and twist, it will create some leverage to be able to separate the base here, and once you have that separated, you can actually pull it towards you and pull that open. Now, the internals of the key here, you can just pull out like so, and then we can set aside the outer case for the time being. Okay, so the key Fob internals. If we look at it like this again, there’s going to be another notch in this orientation in the upper right.
So take your small Phillips screwdriver again and just get it in a notch and twist. That should allow you to pop open these two pieces, give us access to the internal battery here. This little battery is a CR 1616, which we can pop off like so just getting underneath here that will pop out, and we have a CR 1616 3 volt coin battery. We put a new one back in.
Just make sure the positive side with all the lettering is facing away from you and just pop that back in there’s. Not really any overhangs or anything. You can really just push that right back in, put the two pieces back together, and then if you have a light on yours, you can kind of verify that it’s working.
So there it is. Okay, so it looks good. Go ahead and reassemble the outer case, pop that back in there, make sure coming through looks good, and then when you’re reassembling this outer shell, there’s a lip here at the top. If you kind of get that set first, it makes getting the base much easier first, and then you can pop in the base, put in a little baby screw, and that’s it.
That’s how you change the key battery in a Honda Pilot Key Fob Battery from 2005 to 2015.
Leave a Comment